Info

PT. ZTE Indonesia as subsidiary company of ZTE Corporation is one of the leading telecommunication solution suppliers based on China providing totasolution to telecom carriers worldwide. ZTE€ £¡Çs over 26,000 employees are working in more than 70 countries and regions in Asia, America, Europe, Africa, etc. In coping with our expansion in locamarket depending on our Indonesian large project demand, ZTE is looking for outstanding employees in Indonesia to filin the vacant position (See Below File)

Please send your resume completely (CV, recent photograph, photocopy of ID Card, certificate and academic transcript) and please quote job reference code and the region code you wish to apply as a letter subject (e.g.: NME-JKT) or you can send email to: M.MirzaSaputra@zte.com.cn Further information, you could contact Me at +622125542606 Ext.2678.

Note : All-AlOver Indonesia, JKT-Jakarta, BJM-Banjarmasin, BPP-Balikpapan, SMD-Samarinda

P.S : Application Letter & CV MUST in English.

BSS SUPPORT ENGINEER (BSS- BPP / SMD)

Requirement for BSS-JTSE:

• Bachelor/Master degree in Electrical/Electronics with at least 2 year in mobile/consumer/wireless industry.
• Requires proven technicaBTS, BSC, commissioning, testing and related tools.
• Ability to work in a cross-functionaenvironment.
• Position requires excellent written and verbacommunication skills in English and Bahasa.
• Excellent presentation skills and ability to multi task wilbe a strong plus.
• Have to work at Balikpapan or Samarinda.
• Responsibilities for BSS-JTSE:
• Responsible for BSC and BTS System related equipment maintenance;
• Assist to InitiaCorrection for NOC Surveillance Initiated Fault;
• New BSC / BTS / Transmission Site Acceptance on Behave of Customer;
• Fault Prioritizing, Diagnosis/Resolution;
• Acceptance Prior to Release into CommerciaNetwork;
• Other Services – Acceptance Tests and Other Services;
• Technicasupport to the Transmission fault diagnosis with the Subcon Maintenance team;
• Escalate the faults to NOC which can not be solved on the spot;
• Receive the BSS initiafaultS information from NOC monitoring Engineers and monitor Subcon maintenance team€ £¡Çs fault diagnosis process.
• Submit the Daily and weekly maintenance reports to the BSS Expert in NOC.

MICROWAVE SUPPORT ENGINEER (MW-BJM / BPP)

Requirement for Microwave support engineer:

• Bachelor/Master degree in Electrical/Electronics with at least 2 year in mobile/consumer/wireless industry.
• Requires proven technicaMicrowave and related tools.
• Ability to work in a cross-functionaenvironment.
• Position requires excellent written and verbacommunication skills in English and Bahasa.
• Excellent presentation skills and ability to multi task wilbe a strong plus.
• Have to work at Balikpapan or Banjarmasin
• Responsibilities for Microwave support engineer:
• Be responsible for project implementation and product maintenance.
• Provide guidance, consultancy, technicasupport, and problem resolution to key customers/channepartners in project implementation.
• Lead role in working with the team to continuously enhance and improve the support service framework to achieve channepartners and customers satisfaction.

PERFORMANCE ENGINEER (PE-JKT)

Requirement for performance engineer:

• Bachelor/Master degree in Electrical/Electronics with at least 2 year in mobile/consumer/wireless industry.
• Requires proven technicaperformance and related tools.
• Ability to work in a cross-functionaenvironment.
• Position requires excellent written and verbacommunication skills in English and Bahasa.
• Excellent presentation skills and ability to multi task wilbe a strong plus.
• Responsibilities for performance engineer
• Performance Reporting (Daily, Weekly & Monthly);
• Tier 2 NOC Based RF Performance Monitoring and Optimization;
• Performance Management – Performance Monitoring and Capacity Monitoring;
• Estimate future development and provide network plan to meet traffic capacity requirements
• Study system parameter and optimize them for better system performance
• Network Performance and Capacity Monitoring, Reporting and Analysis;
• Propose Recommendation for Network Performance;
• Performance Assessment and optimization;
• Assist Budgeting and Forecasting Network Expansion and Operations.;
• Assist with the Network Monitoring Engineer to monitor the network Performance;
• Submit the Abnormaperformance report to RF Planning and optimization Engineer.
• Monitor Network Utilization and Propose Recommendation for Capacity Solution

CONFIGURATION ENGINEER (CE-JKT)

Requirement for configuration engineer:

• Bachelor/Master degree in Electrical/Electronics with at least 2 year
• in mobile/consumer/wireless industry.
• Requires proven technicaconfiguration and related tools.
• Ability to work in a cross-functionaenvironment.
• Position requires excellent written and verbacommunication skills in English and Bahasa.
• Excellent presentation skills and ability to multi task wilbe a strong plus.
• Responsibilities for configuration engineer Circuit Provisioning;
• Circuit Addition, Deletion, Modification & Test;
• Database Preparation for Circuit Provisioning;
• Implement BTS DatafilUpdates;
• Service and Resource Configuration;
• System Configuration;
• Hardware and software Configuration;
• Configurations Management;
• Data Book for Network Configuration Information;
• Prepare and Implement Database/PhysicaObject for Network Capacity Issues;
• Test Bed management and Procure Test Bed for Testing Activities
• Apply Test Bed for IOT tests, Triaof New H/W & S/W or Verification of SIMs, and etc.
• Monitoring the accomplishment of the data back up for each OMC from the Network Monitoring staff.

NETWORK MONITORING Engineer (NME-JKT)

Requirement for network monitoring engineer:

• Bachelor/Master degree in Electrical/Electronics with at least 2 year in mobile/consumer/wireless industry.
• Requires proven technicanetwork monitoring and related tools.
• Ability to work in a cross-functionaenvironment.
• Position requires excellent written and verbacommunication skills in English and Bahasa.
• Excellent presentation skills and ability to multi task wilbe a strong plus.
• Willing to work under shifting working hours.
• Responsibilities for network monitoring engineer
• NOC Surveillance Initiated Fault Reporting;
• 7×24×365 NOC Surveillance;
• Tier 1 Surveillance – Network Operation Centre;
• Escalation for Problem resolution;
• Network Event Severity LeveIdentification (Critical, Major, Minor and Informational);
• Detect the alarmsfrom the OMC 7×24 , and dispatch the alarms to the RegionaNetwork Engineer team and FLM team technician on spot to resolve .
• Input the alarms into the Trouble ticket system under the guideance of the E-OMS Engineer.
• Monitoring the whole process of the tickets items ,and close the alarms within the SLA.
• Reminding the FLM Engineers of solving the problems according to the different levealarms ;
• Submiting the daily maintenance report to E-OMS Engineer and Network Monitoring team leader;
• Escalate the alarms to Expert in NOC in time of the problems can not be solved by RegionaNetwork Engineer team and FLM team member on spot to
• resolve, Escalate the alarms to Expert from RCSC and GCSC of the problems which can not be solved by RegionaNetwork Engineer team and FLM team member on spot to resolve;

Best Regards,

Muhamad Mirza Saputra

HR Dept,
ZTE Indonesia, PT
The East Building, 26th Floor
Lingkar Mega Kuningan, Kav.E3.2 No.1
South Jakarta 12950
Phone +62 21 2554 2606 Ext.2678
Fax +62 21 2554 2067
Mobile +62 815 1902 1234 (Sorry No SMS, Available Only At Working Days)

Email: M.MirzaSaputra@zte.com.cn
Website www.zte.com.cn

Lowongan kerja teknik telekomunikasi, lowongan S1 dan S2